dmesg - Intel 0000 - ASPEED ASPEED Family - Supermicro
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-59-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff] usable
BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000078f71fff] usable
BIOS-e820: [mem 0x0000000078f72000-0x0000000079896fff] reserved
BIOS-e820: [mem 0x0000000079897000-0x0000000079d9dfff] ACPI NVS
BIOS-e820: [mem 0x0000000079d9e000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Supermicro Super Server/X10SRM-F, BIOS 2.0a 06/24/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x78f72 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd40-0x000fcd4f] mapped at [ffff8800000fcd40]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000093000] 93000 size 24576
Using GB pages for direct mapping
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
RAMDISK: [mem 0x33866000-0x35c2afff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM)
ACPI: XSDT 0x00000000798F30A0 0000BC (v01 01072009 AMI 00010013)
ACPI: FACP 0x0000000079923E08 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 0x00000000798F31F0 030C18 (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0x0000000079D9CF80 000040
ACPI: APIC 0x0000000079923F18 0001E0 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 0x00000000799240F8 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FIDT 0x0000000079924140 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SPMI 0x00000000799241E0 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 0x0000000079924220 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079924260 000042 (v01 SUPERM SMCI--MB 01072009 00000000)
ACPI: HPET 0x00000000799242A8 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: WDDT 0x00000000799242E0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 0x0000000079924320 016F57 (v02 SUPERM PmMgt 00000001 INTL 20120913)
ACPI: NITR 0x000000007993B278 000071 (v02 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: SSDT 0x000000007993B2F0 00264C (v02 SUPERM SpsNm 00000002 INTL 20120913)
ACPI: SSDT 0x000000007993D940 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 0x000000007993D9A8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 0x000000007993DAB0 0000BC (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: HEST 0x000000007993DB70 00027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: BERT 0x000000007993DDF0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: ERST 0x000000007993DE20 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: EINJ 0x000000007993E050 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
NODE_DATA(0) allocated [mem 0x87fff9000-0x87fffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000087fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000098fff]
node 0: [mem 0x0000000000100000-0x0000000078f71fff]
node 0: [mem 0x0000000100000000-0x000000087fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
On node 0 totalpages: 8359690
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3992 pages, LIFO batch:0
DMA32 zone: 7678 pages used for memmap
DMA32 zone: 491378 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 28 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x78f72000-0x79896fff]
PM: Registered nosave memory: [mem 0x79897000-0x79d9dfff]
PM: Registered nosave memory: [mem 0x79d9e000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:28 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88085ee00000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8229047
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32789228K/33438760K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 649532K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=28, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=28.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=28
NR_IRQS:33024 nr_irqs:1056 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2000.089 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.17 BogoMIPS (lpj=8000356)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
ftrace: allocating 32064 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007ba71000 end: 0x0000007ba7ffff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Genuine Intel(R) CPU 0000 @ 2.00GHz (family: 0x6, model: 0x4f, stepping: 0x0)
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27
x86: Booted up 1 node, 28 CPUs
smpboot: Total of 28 processors activated (112004.98 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x79897000-0x79d9dfff] (5271552 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 17:41:17, date: 01/26/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD 0x0000000000000000 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Enabling Firmware First mode for corrected errors.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [AER]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:6fea] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:6feb] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:6fec] type 00 class 0x088000
pci 0000:ff:0d.5: [8086:6fed] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:6ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:6ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:6f60] type 00 class 0x088000
pci 0000:ff:12.4: reg 0x14: [mem 0x00000000-0x0000000f]
pci 0000:ff:12.4: reg 0x18: [mem 0x00000000-0x0000003f]
pci 0000:ff:12.4: reg 0x1c: [mem 0x00000000-0x0000000f]
pci 0000:ff:12.4: reg 0x20: [mem 0x00000000-0x0000003f]
pci 0000:ff:12.4: reg 0x24: [mem 0x00000000-0x0000000f]
pci 0000:ff:12.5: [8086:6f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:6f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:6f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:6f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:6fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:6fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:6fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f window]
pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:6f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfb22c000-0xfb22ffff 64bit]
pci 0000:00:04.1: [8086:6f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfb228000-0xfb22bfff 64bit]
pci 0000:00:04.2: [8086:6f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfb224000-0xfb227fff 64bit]
pci 0000:00:04.3: [8086:6f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfb220000-0xfb223fff 64bit]
pci 0000:00:04.4: [8086:6f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfb21c000-0xfb21ffff 64bit]
pci 0000:00:04.5: [8086:6f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfb218000-0xfb21bfff 64bit]
pci 0000:00:04.6: [8086:6f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfb214000-0xfb217fff 64bit]
pci 0000:00:04.7: [8086:6f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfb210000-0xfb213fff 64bit]
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb239000-0xfb239fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:11.4: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb238000-0xfb2387ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb200000-0xfb20ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb237000-0xfb23700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb236000-0xfb23600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb234000-0xfb2343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb233000-0xfb2333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb232000-0xfb2327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb231000-0xfb2310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1521] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfb120000-0xfb13ffff]
pci 0000:03:00.0: reg 0x18: [io 0xe020-0xe03f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfb144000-0xfb147fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:03:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:03:00.1: [8086:1521] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xfb100000-0xfb11ffff]
pci 0000:03:00.1: reg 0x18: [io 0xe000-0xe01f]
pci 0000:03:00.1: reg 0x1c: [mem 0xfb140000-0xfb143fff]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:03:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:03:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:03.2: PCI bridge to [bus 03]
pci 0000:00:03.2: bridge window [io 0xe000-0xefff]
pci 0000:00:03.2: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 05-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:06:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:06:00.0
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x78f72000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:ff:12.4: BAR 2: no space for [mem size 0x00000040]
pci 0000:ff:12.4: BAR 2: failed to assign [mem size 0x00000040]
pci 0000:ff:12.4: BAR 4: no space for [mem size 0x00000040]
pci 0000:ff:12.4: BAR 4: failed to assign [mem size 0x00000040]
pci 0000:ff:12.4: BAR 1: no space for [mem size 0x00000010]
pci 0000:ff:12.4: BAR 1: failed to assign [mem size 0x00000010]
pci 0000:ff:12.4: BAR 3: no space for [mem size 0x00000010]
pci 0000:ff:12.4: BAR 3: failed to assign [mem size 0x00000010]
pci 0000:ff:12.4: BAR 5: no space for [mem size 0x00000010]
pci 0000:ff:12.4: BAR 5: failed to assign [mem size 0x00000010]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: max bus depth: 2 pci_try_num: 3
pci 0000:00:03.2: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref]
pci 0000:03:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref]
pci 0000:03:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref]
pci 0000:03:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 03]
pci 0000:00:03.2: bridge window [io 0xe000-0xefff]
pci 0000:00:03.2: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:03.2: bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:05:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.2: PCI bridge to [bus 05-06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xfedb0000-0xfedb000f window]
pci_bus 0000:00: resource 8 [mem 0xfedc0000-0xfedc000f window]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:06:00.0: Video device with shadowed ROM
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36628K (ffff880033866000 - ffff880035c2b000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x74f72000-0x78f72000] (64MB) mapped at [ffff880074f72000-ffff880078f71fff]
Intel CQM monitoring enabled
Intel MBM enabled
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1485452478.152:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfa000000, mapped to 0xffffc90003800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb234000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb233000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-59-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
tsc: Refined TSC clocksource calibration: 1999.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39a8595ce59, max_idle_ns: 881590778713 ns
usb 3-14: new high-speed USB device number 2 using xhci_hcd
usb 3-14: New USB device found, idVendor=0557, idProduct=7000
usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU1 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU2 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU3 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU4 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU5 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU6 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU7 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU8 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU9 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU10 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU11 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU12 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU13 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU14 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU15 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU16 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU17 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU18 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU19 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU20 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU21 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU22 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU23 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU24 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU25 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU26 sig=0x406f0, pf=0x20, revision=0x14
microcode: CPU27 sig=0x406f0, pf=0x20, revision=0x14
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6ffa6bfaa152a74cd2b6aa1e188cb999d8f5632b'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 1:858:694
acpi LNXCPU:35: hash matches
rtc_cmos 00:00: setting system clock to 2017-01-26 17:41:20 UTC (1485452480)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
hub 3-14:1.0: USB hub found
Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
hub 3-14:1.0: 4 ports detected
Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
clocksource: Switched to clocksource tsc
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[drm] Initialized drm 1.1.0 20060810
PTP clock support registered
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
scsi host0: ahci
scsi host1: ahci
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram 1632000000 1 16 01000000
[TTM] Zone kernel: Available graphics memory: 16414652 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
usb 3-14.1: new low-speed USB device number 3 using xhci_hcd
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:da:62:9e
igb 0000:03:00.0: eth0: PBA No: 010A00-000
igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb238000 port 0xfb238100 irq 32
usb 3-14.1: New USB device found, idVendor=0557, idProduct=2419
usb 3-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-14.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-14.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 40 microframes
igb 0000:03:00.1: added PHC on eth1
igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:da:62:9f
igb 0000:03:00.1: eth1: PBA No: 010A00-000
igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
ata2: SATA max UDMA/133 abar m2048@0xfb238000 port 0xfb238180 irq 32
ata3: SATA max UDMA/133 abar m2048@0xfb238000 port 0xfb238200 irq 32
ata4: SATA max UDMA/133 abar m2048@0xfb238000 port 0xfb238280 irq 32
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
checking generic (fa000000 500000) vs hw (fa000000 1000000)
fb: switching to astdrmfb from VESA VGA
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
Console: switching to colour dummy device 80x25
fbcon: astdrmfb (fb0) is primary device
scsi host4: ahci
igb 0000:03:00.0 eno1: renamed from eth0
Console: switching to colour frame buffer device 240x75
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232100 irq 53
ata6: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232180 irq 53
ata7: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232200 irq 53
ata8: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232280 irq 53
ata9: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232300 irq 53
ata10: SATA max UDMA/133 abar m2048@0xfb232000 port 0xfb232380 irq 53
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.0/0003:0557:2419.0001/input/input2
ast 0000:06:00.0: fb0: astdrmfb frame buffer device
hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.1/0003:0557:2419.0002/input/input3
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1
[drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on minor 0
igb 0000:03:00.1 eno2: renamed from eth1
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-10: ST10000VN0004-1ZD101, SC60, max UDMA/133
ata1.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC60 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATA-10: ST10000VN0004-1ZD101, SC60, max UDMA/133
ata2.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-10: ST10000VN0004-1ZD101, SC60, max UDMA/133
ata3.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC60 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST10000VN0004-1Z SC60 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: supports DRM functions and may not be fully accessible
ata8.00: supports DRM functions and may not be fully accessible
ata6.00: supports DRM functions and may not be fully accessible
ata7.00: disabling queued TRIM support
ata7.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata7.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata8.00: disabling queued TRIM support
ata8.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata8.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata5.00: ATA-9: SanDisk SDSSDHII960G, X35510RL, max UDMA/133
ata5.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: disabling queued TRIM support
ata6.00: ATA-9: Samsung SSD 850 EVO 2TB, EMT02B6Q, max UDMA/133
ata6.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata7.00: supports DRM functions and may not be fully accessible
ata8.00: supports DRM functions and may not be fully accessible
ata7.00: disabling queued TRIM support
ata8.00: disabling queued TRIM support
ata6.00: supports DRM functions and may not be fully accessible
ata5.00: configured for UDMA/133
ata7.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA SanDisk SDSSDHII 10RL PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata8.00: configured for UDMA/133
sdd: sdd1 sdd2 sdd3 sdd4
sd 4:0:0:0: [sdd] Attached SCSI disk
ata6.00: disabling queued TRIM support
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 5:0:0:0: Attached scsi generic sg4 type 0
scsi 6:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 6:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 6:0:0:0: [sdf] Write Protect is off
sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 6:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sdf: sdf1 sdf2 sdf3 sdf4
sd 7:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 7:0:0:0: [sdg] Write Protect is off
sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: Attached scsi generic sg6 type 0
sdg: sdg1 sdg2 sdg3 sdg4
sd 6:0:0:0: [sdf] Attached SCSI disk
sd 7:0:0:0: [sdg] Attached SCSI disk
md: bind
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
md: bind
sde: sde1 sde2 sde3 sde4
sd 5:0:0:0: [sde] Attached SCSI disk
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: raid0 personality registered for level 0
md: bind
md: bind
md: bind
md/raid0:md123: md_size is 11317635072 sectors.
md/raid0:md124: md_size is 352118784 sectors.
md: RAID0 configuration for md124 - 1 zone
md: zone0=[sde3/sdf3/sdg3]
zone-offset= 0KB, device-offset= 0KB, size= 176059392KB
md/raid0:md125: md_size is 47929344 sectors.
md: RAID0 configuration for md125 - 1 zone
md: zone0=[sde2/sdf2/sdg2]
zone-offset= 0KB, device-offset= 0KB, size= 23964672KB
md124: detected capacity change from 0 to 180284817408
md125: detected capacity change from 0 to 24539824128
md: raid1 personality registered for level 1
md/raid1:md126: active with 3 out of 3 mirrors
md126: detected capacity change from 0 to 399179776
md: RAID0 configuration for md123 - 1 zone
md: zone0=[sde4/sdf4/sdg4]
zone-offset= 0KB, device-offset= 0KB, size=5658817536KB
md123: detected capacity change from 0 to 5794629156864
md: bind
md: raid10 personality registered for level 10
md/raid10:md127: active with 3 out of 3 devices
md127: detected capacity change from 0 to 15001042550784
md: linear personality registered for level -1
md: multipath personality registered for level -4
raid6: sse2x1 gen() 7117 MB/s
raid6: sse2x1 xor() 4959 MB/s
raid6: sse2x2 gen() 10629 MB/s
raid6: sse2x2 xor() 5919 MB/s
raid6: sse2x4 gen() 9115 MB/s
raid6: sse2x4 xor() 8686 MB/s
raid6: avx2x1 gen() 12500 MB/s
raid6: avx2x2 gen() 15146 MB/s
raid6: avx2x4 gen() 22556 MB/s
raid6: using algorithm avx2x4 gen() 22556 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 25138.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
Btrfs loaded
random: nonblocking pool is initialized
EXT4-fs (md124): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/lib/systemd/system/plexmediaserver.service:11] Invalid escape sequences in line, correcting: "/bin/sh -c 'LD_LIBRARY_PATH=/usr/lib/plexmediaserver /usr/lib/plexmediaserver/Plex\ Media\ Server'"
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: PNFS blkmaping enablement. is not active.
systemd[1]: Dependency failed for pNFS block layout mapping daemon.
systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting NFSD configuration filesystem...
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd[1]: Starting Nameserver information manager...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Load Kernel Modules...
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Set console keymap...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounted NFSD configuration filesystem.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Journal Service.
EXT4-fs (md124): re-mounted. Opts: errors=remount-ro
systemd-journald[680]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ioatdma: Intel(R) QuickData Technology Driver 4.00
igb 0000:03:00.0: DCA enabled
igb 0000:03:00.1: DCA enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (POLLED)
EDAC sbridge: Ver: 1.1.1
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
intel_rapl: Found RAPL domain package
ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0924, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
Adding 23964668k swap on /dev/md125. Priority:-1 extents:1 across:23964668k FS
EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md123): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1485452487.976:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1508 comm="apparmor_parser"
audit: type=1400 audit(1485452487.976:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=1509 comm="apparmor_parser"
audit: type=1400 audit(1485452487.976:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=1510 comm="apparmor_parser"
audit: type=1400 audit(1485452487.980:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1511 comm="apparmor_parser"
audit: type=1400 audit(1485452487.980:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1511 comm="apparmor_parser"
audit: type=1400 audit(1485452487.980:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1513 comm="apparmor_parser"
audit: type=1400 audit(1485452487.980:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1507 comm="apparmor_parser"
audit: type=1400 audit(1485452487.980:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1507 comm="apparmor_parser"
audit: type=1400 audit(1485452487.980:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1507 comm="apparmor_parser"
audit: type=1400 audit(1485452487.980:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1507 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
cgroup: new mount options do not match the existing superblock, will be ignored
igb 0000:03:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81ef56c0)
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
ipmi device interface
NMI watchdog: Watchdog detected hard LOCKUP on cpu 0
Modules linked in:
msr ipmi_devintf arc4 md4 nls_utf8 cifs fscache binfmt_misc ipmi_ssif intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass sb_edac edac_core input_leds joydev mei_me lpc_ich mei shpchp ioatdma ipmi_si 8250_fintek ipmi_msghandler acpi_pad acpi_power_meter mac_hid ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfsd auth_rpcgss nfs_acl lockd grace sunrpc autofs4 btrfs raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c multipath linear raid10 raid1 raid0 hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ast aesni_intel aes_x86_64 ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper igb cryptd syscopyarea sysfillrect sysimgblt dca fb_sys_fops
ahci ptp drm libahci pps_core i2c_algo_bit wmi fjes
CPU: 0 PID: 2941 Comm: stress-ng-cpu Not tainted 4.4.0-59-generic #80-Ubuntu
Hardware name: Supermicro Super Server/X10SRM-F, BIOS 2.0a 06/24/2016
0000000000000086 0000000006dd126d ffff88085b063bd0 ffffffff813f7583
0000000000000000 0000000000000000 ffff88085b063be8 ffffffff8113c35d
ffff88085e814800 ffff88085b063c20 ffffffff8118508c 0000000000000002
Call Trace:
[] dump_stack+0x63/0x90
[] watchdog_overflow_callback+0xbd/0xd0
[] __perf_event_overflow+0x8c/0x1d0
[] perf_event_overflow+0x14/0x20
[] intel_pmu_handle_irq+0x1e1/0x4a0
[] ? event_sched_in.isra.101+0xe2/0x2c0
[] ? perf_mux_hrtimer_restart+0x40/0xa0
[] ? group_sched_in+0x1a7/0x1c0
[] ? intel_pmu_enable_event+0xfc/0x220
[] ? ctx_sched_in+0x203/0x450
[] ? perf_event_sched_in+0x60/0x80
[] ? perf_pmu_enable.part.89+0x7/0x10
[] ? perf_event_context_sched_in+0xaf/0xd0
[] ? __perf_event_task_sched_in+0xf0/0x110
[] ? __switch_to+0x1dc/0x5c0
[] perf_event_nmi_handler+0x2d/0x50
[] nmi_handle+0x69/0x120
[] default_do_nmi+0x40/0x100
[] do_nmi+0xe2/0x130
[] nmi+0x56/0xa5
NMI watchdog: Watchdog detected hard LOCKUP on cpu 9
Modules linked in:
msr ipmi_devintf arc4 md4 nls_utf8 cifs fscache binfmt_misc ipmi_ssif intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass sb_edac edac_core input_leds joydev mei_me lpc_ich mei shpchp ioatdma ipmi_si 8250_fintek ipmi_msghandler acpi_pad acpi_power_meter mac_hid ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfsd auth_rpcgss nfs_acl lockd grace sunrpc autofs4 btrfs raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c multipath linear raid10 raid1 raid0 hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ast aesni_intel aes_x86_64 ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper igb cryptd syscopyarea sysfillrect sysimgblt dca fb_sys_fops
ahci ptp drm libahci pps_core i2c_algo_bit wmi fjes
CPU: 9 PID: 2933 Comm: stress-ng-cpu Not tainted 4.4.0-59-generic #80-Ubuntu
Hardware name: Supermicro Super Server/X10SRM-F, BIOS 2.0a 06/24/2016
0000000000000086 000000001babe599 ffff8807e9f8fbd0 ffffffff813f7583
0000000000000000 0000000000000000 ffff8807e9f8fbe8 ffffffff8113c35d
ffff88085a858000 ffff8807e9f8fc20 ffffffff8118508c 0000000000000002
Call Trace:
[] dump_stack+0x63/0x90
[] watchdog_overflow_callback+0xbd/0xd0
[] __perf_event_overflow+0x8c/0x1d0
[] perf_event_overflow+0x14/0x20
[] intel_pmu_handle_irq+0x1e1/0x4a0
[] ? event_sched_in.isra.101+0xe2/0x2c0
[] ? perf_mux_hrtimer_restart+0x40/0xa0
[] ? group_sched_in+0x1a7/0x1c0
[] ? intel_pmu_enable_event+0xfc/0x220
[] ? vunmap_page_range+0x20d/0x330
[] ? unmap_kernel_range_noflush+0x11/0x20
[] ? ghes_copy_tofrom_phys+0x10f/0x2a0
[] ? native_apic_wait_icr_idle+0x1f/0x30
[] perf_event_nmi_handler+0x2d/0x50
[] nmi_handle+0x69/0x120
[] default_do_nmi+0xb6/0x100
[] do_nmi+0xe2/0x130
[] nmi+0x56/0xa5
NMI watchdog: Watchdog detected hard LOCKUP on cpu 8
Modules linked in:
msr ipmi_devintf arc4 md4 nls_utf8 cifs fscache binfmt_misc ipmi_ssif intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass sb_edac edac_core input_leds joydev mei_me lpc_ich mei shpchp ioatdma ipmi_si 8250_fintek ipmi_msghandler acpi_pad acpi_power_meter mac_hid ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfsd auth_rpcgss nfs_acl lockd grace sunrpc autofs4 btrfs raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c multipath linear raid10 raid1 raid0 hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ast aesni_intel aes_x86_64 ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper igb cryptd syscopyarea sysfillrect sysimgblt dca fb_sys_fops
ahci ptp drm libahci pps_core i2c_algo_bit wmi fjes
CPU: 8 PID: 2956 Comm: stress-ng-cpu Not tainted 4.4.0-59-generic #80-Ubuntu
Hardware name: Supermicro Super Server/X10SRM-F, BIOS 2.0a 06/24/2016
0000000000000086 000000009cfb85f7 ffff880851143bd0 ffffffff813f7583
0000000000000000 0000000000000000 ffff880851143be8 ffffffff8113c35d
ffff88085a820000 ffff880851143c20 ffffffff8118508c 0000000000000001
Call Trace:
[] dump_stack+0x63/0x90
[] watchdog_overflow_callback+0xbd/0xd0
[] __perf_event_overflow+0x8c/0x1d0
[] perf_event_overflow+0x14/0x20
[] intel_pmu_handle_irq+0x1e1/0x4a0
[] ? event_sched_in.isra.101+0xe2/0x2c0
[] ? perf_mux_hrtimer_restart+0x40/0xa0
[] ? group_sched_in+0x1a7/0x1c0
[] ? intel_pmu_enable_event+0xfc/0x220
[] ? vunmap_page_range+0x20d/0x330
[] ? unmap_kernel_range_noflush+0x11/0x20
[] ? ghes_copy_tofrom_phys+0x10f/0x2a0
[] ? native_apic_wait_icr_idle+0x1f/0x30
[] perf_event_nmi_handler+0x2d/0x50
[] nmi_handle+0x69/0x120
[] default_do_nmi+0x40/0x100
[] do_nmi+0xe2/0x130
[] nmi+0x56/0xa5
NMI watchdog: Watchdog detected hard LOCKUP on cpu 7
Modules linked in:
msr ipmi_devintf arc4 md4 nls_utf8 cifs fscache binfmt_misc ipmi_ssif intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass sb_edac edac_core input_leds joydev mei_me lpc_ich mei shpchp ioatdma ipmi_si 8250_fintek ipmi_msghandler acpi_pad acpi_power_meter mac_hid ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi nfsd auth_rpcgss nfs_acl lockd grace sunrpc autofs4 btrfs raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c multipath linear raid10 raid1 raid0 hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ast aesni_intel aes_x86_64 ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper igb cryptd syscopyarea sysfillrect sysimgblt dca fb_sys_fops
ahci ptp drm libahci pps_core i2c_algo_bit wmi fjes
CPU: 7 PID: 2984 Comm: stress-ng-cpu Not tainted 4.4.0-59-generic #80-Ubuntu
Hardware name: Supermicro Super Server/X10SRM-F, BIOS 2.0a 06/24/2016
0000000000000086 00000000b4f85de7 ffff880852e8fbd0 ffffffff813f7583
0000000000000000 0000000000000000 ffff880852e8fbe8 ffffffff8113c35d
ffff88085afc0000 ffff880852e8fc20 ffffffff8118508c 0000000000000002
Call Trace:
[] dump_stack+0x63/0x90
[] watchdog_overflow_callback+0xbd/0xd0
[] __perf_event_overflow+0x8c/0x1d0
[] perf_event_overflow+0x14/0x20
[] intel_pmu_handle_irq+0x1e1/0x4a0
[] ? event_sched_in.isra.101+0xe2/0x2c0
[] ? perf_mux_hrtimer_restart+0x40/0xa0
[] ? group_sched_in+0x1a7/0x1c0
[] ? intel_pmu_enable_event+0x1eb/0x220
[] ? ctx_sched_in+0x203/0x450
[] ? perf_event_sched_in+0x60/0x80
[] ? perf_pmu_enable.part.89+0x7/0x10
[] ? perf_event_context_sched_in+0xaf/0xd0
[] ? __perf_event_task_sched_in+0xf0/0x110
[] ? __switch_to+0x1dc/0x5c0
[] perf_event_nmi_handler+0x2d/0x50
[] nmi_handle+0x69/0x120
[] default_do_nmi+0x40/0x100
[] do_nmi+0xe2/0x130
[] nmi+0x56/0xa5
perf interrupt took too long (2513 > 2500), lowering kernel.perf_event_max_sample_rate to 50000